Featured Videos
\n\nBLUETTI RVSolar vs EcoFlow Power Kit
\n\nSummary: Bluetti delivers higher output, longer cycle life, tighter integration, and IP65-rated components, while EcoFlow provides higher solar and alternator input potential.
\n| Specification | \nBLUETTI RVSolar 48V | \nEcoFlow 5kVA Power Kit | \n
|---|---|---|
| System Voltage | \n48V (51.2V nominal) | \n48V (51.2V nominal) | \n
| Inverter Output | \n\n5,000W Pure sine, 5kW continuous.\n | \n\n4,000W Pure sine, 4kW continuous.\n | \n
| AC Input / Shore Power | \nUp to 5,000W (Watts = Real Power) | \n5,000VA Max (VA = Apparent Power) | \n
| Solar Charging Input | \nUp to 1,800W (12–50V, 50A) | \n7,200W Max (3 MPPT: 4,000W + 1,600W + 1,600W) | \n
| Alternator Charging | \nUp to 1,200W (12/24V Vehicle Input) | \nUp to 4,800W (13–60V, 60A/30A/30A) | \n
| DC Output | \n1,360W Max (12V) / 1,620W Max (24V) | \n1,300W Max (12V) / 1,600W Max (24V) | \n
| Battery Capacity | \n5.12 kWh (51.2V, 100Ah) | \n5.12 kWh (51.2V, 100Ah) | \n
| Cycle Life | \n6,000+ cycles up to 70% capacity | \n3,500 cycles up to 80% capacity | \n
| Battery IP Rating | \nIP65 (dust-tight, water-jet resistant) | \nIP54 (limited dust, splash resistant) | \n
| Operating Temp | \n–4°F to 131°F (self-heating) | \n–4°F to 122°F (self-heating) | \n
BLUETTI 5kWh RVSolar 48V Power System
BLUETTI RV5 RVSolar 48V Power System — 5,000W continuous output with long-life LiFePO4 batteries. Charge from shore, solar, or alternator and power real loads like A/C, cooking, and charging through the integrated AC/DC distribution.
All the power. Half the hassle. Expert advice + after-sale support.
5,000W continuous output, LiFePO4 longevity, shore/solar/alternator charging—built for real life on the road.
The 48V core system delivers 120V AC, and 12V or 24V DC via the integrated AC/DC distribution panel. In combination with the high output of the system, this means that a standard 120V or 12V air conditioner can be operated through the system just like any other appliance. However, because the battery bank itself operates at 48V, choosing a 48V air conditioner will offer the highest efficiency.
48V air conditioners can be wired directly to the 48V battery bank, bypassing the distribution panel. This setup reduces current, minimizes losses, and delivers noticeably better performance, especially in high heat or extended off-grid use. Because the Epad receives data directly from the battery BMS, it continues to show:
- Correct state of charge
- Correct runtime remaining
Even with the A/C pulling power directly from the battery bank, SOC and remaining runtime tracking operates as usual, however the real-time watt draw readout for the A/C does not appear on the Epad screen.
No more “one-at-a-time”
5,000 W to run A/C, microwave, coffee maker—simultaneously.
10+ years of power
LiFePO4 cells rated for 6,000+ cycles keep you rolling for the long haul.
Charge anywhere
Solar up to 1,800 W • Alternator up to 1,200 W • Shore up to 5,000 W.
Weekend-friendly install
Plug-and-play design—no electrical degree required.
Generator-free peace
Quiet, fume-free, low-maintenance. Enjoy the silence.
Travel with confidence
UL-certified, IP65 water-resistant. Built for bumps and spills.
Smart control
Monitor & manage on Epad or the BLUETTI app—anywhere.
Stop rationing power. Goodbye power anxiety.
5,000 W continuous output feels like home—A/C + cook + charge at once. B4810 LiFePO4 delivers 6,000+ cycles and self-heating for cold starts. Just 7 W standby keeps every charge going further.
Fast, flexible charging for non-stop adventure
Up to 5,000 W from shore, 1,800 W from the sun, and 1,200 W from your alternator while driving. Keep moving—don’t babysit a battery.
True tranquility, powered by safety
LiFePO4 chemistry + UL certification = quiet confidence for families and pets. No fumes, no fuss—just power.
Smart-home vibes, open-road ready
An HD Epad touchscreen centralizes power flows, battery status, and inputs. Prefer your phone? The BLUETTI app has you covered.
Tech Specs — RV5 Power Hub
Tech Specs — B4810 Battery
In the Box
-
RV5 Power Hubx 1
-
M8 Wood Screwx 8
-
Anchorx 8
-
Drilling Templatex 1
-
User Manualx 1
-
B4810 LiFePO₄ Batteryx 1
-
Epanelx 1
-
Epadx 1
-
Free Battery Connection Wiring Pack ($99)x 1
-
Free Alternator Charger Wiring Pack ($179)x 1
-
Free Distribution Panel Wiring Pack ($149)x 1
Downloads
Featured Videos
BLUETTI RVSolar vs EcoFlow Power Kit
Summary: Bluetti delivers higher output, longer cycle life, tighter integration, and IP65-rated components, while EcoFlow provides higher solar and alternator input potential.
| Specification | BLUETTI RVSolar 48V | EcoFlow 5kVA Power Kit |
|---|---|---|
| System Voltage | 48V (51.2V nominal) | 48V (51.2V nominal) |
| Inverter Output | 5,000W Pure sine, 5kW continuous. | 4,000W Pure sine, 4kW continuous. |
| AC Input / Shore Power | Up to 5,000W (Watts = Real Power) | 5,000VA Max (VA = Apparent Power) |
| Solar Charging Input | Up to 1,800W (12–50V, 50A) | 7,200W Max (3 MPPT: 4,000W + 1,600W + 1,600W) |
| Alternator Charging | Up to 1,200W (12/24V Vehicle Input) | Up to 4,800W (13–60V, 60A/30A/30A) |
| DC Output | 1,360W Max (12V) / 1,620W Max (24V) | 1,300W Max (12V) / 1,600W Max (24V) |
| Battery Capacity | 5.12 kWh (51.2V, 100Ah) | 5.12 kWh (51.2V, 100Ah) |
| Cycle Life | 6,000+ cycles up to 70% capacity | 3,500 cycles up to 80% capacity |
| Battery IP Rating | IP65 (dust-tight, water-jet resistant) | IP54 (limited dust, splash resistant) |
| Operating Temp | –4°F to 131°F (self-heating) | –4°F to 122°F (self-heating) |
Original: $3,699.00
-70%$3,699.00
$1,109.70
Description
BLUETTI RV5 RVSolar 48V Power System — 5,000W continuous output with long-life LiFePO4 batteries. Charge from shore, solar, or alternator and power real loads like A/C, cooking, and charging through the integrated AC/DC distribution.
All the power. Half the hassle. Expert advice + after-sale support.
5,000W continuous output, LiFePO4 longevity, shore/solar/alternator charging—built for real life on the road.
The 48V core system delivers 120V AC, and 12V or 24V DC via the integrated AC/DC distribution panel. In combination with the high output of the system, this means that a standard 120V or 12V air conditioner can be operated through the system just like any other appliance. However, because the battery bank itself operates at 48V, choosing a 48V air conditioner will offer the highest efficiency.
48V air conditioners can be wired directly to the 48V battery bank, bypassing the distribution panel. This setup reduces current, minimizes losses, and delivers noticeably better performance, especially in high heat or extended off-grid use. Because the Epad receives data directly from the battery BMS, it continues to show:
- Correct state of charge
- Correct runtime remaining
Even with the A/C pulling power directly from the battery bank, SOC and remaining runtime tracking operates as usual, however the real-time watt draw readout for the A/C does not appear on the Epad screen.
No more “one-at-a-time”
5,000 W to run A/C, microwave, coffee maker—simultaneously.
10+ years of power
LiFePO4 cells rated for 6,000+ cycles keep you rolling for the long haul.
Charge anywhere
Solar up to 1,800 W • Alternator up to 1,200 W • Shore up to 5,000 W.
Weekend-friendly install
Plug-and-play design—no electrical degree required.
Generator-free peace
Quiet, fume-free, low-maintenance. Enjoy the silence.
Travel with confidence
UL-certified, IP65 water-resistant. Built for bumps and spills.
Smart control
Monitor & manage on Epad or the BLUETTI app—anywhere.
Stop rationing power. Goodbye power anxiety.
5,000 W continuous output feels like home—A/C + cook + charge at once. B4810 LiFePO4 delivers 6,000+ cycles and self-heating for cold starts. Just 7 W standby keeps every charge going further.
Fast, flexible charging for non-stop adventure
Up to 5,000 W from shore, 1,800 W from the sun, and 1,200 W from your alternator while driving. Keep moving—don’t babysit a battery.
True tranquility, powered by safety
LiFePO4 chemistry + UL certification = quiet confidence for families and pets. No fumes, no fuss—just power.
Smart-home vibes, open-road ready
An HD Epad touchscreen centralizes power flows, battery status, and inputs. Prefer your phone? The BLUETTI app has you covered.
Tech Specs — RV5 Power Hub
Tech Specs — B4810 Battery
In the Box
-
RV5 Power Hubx 1
-
M8 Wood Screwx 8
-
Anchorx 8
-
Drilling Templatex 1
-
User Manualx 1
-
B4810 LiFePO₄ Batteryx 1
-
Epanelx 1
-
Epadx 1
-
Free Battery Connection Wiring Pack ($99)x 1
-
Free Alternator Charger Wiring Pack ($179)x 1
-
Free Distribution Panel Wiring Pack ($149)x 1
Downloads
Featured Videos
BLUETTI RVSolar vs EcoFlow Power Kit
Summary: Bluetti delivers higher output, longer cycle life, tighter integration, and IP65-rated components, while EcoFlow provides higher solar and alternator input potential.
| Specification | BLUETTI RVSolar 48V | EcoFlow 5kVA Power Kit |
|---|---|---|
| System Voltage | 48V (51.2V nominal) | 48V (51.2V nominal) |
| Inverter Output | 5,000W Pure sine, 5kW continuous. | 4,000W Pure sine, 4kW continuous. |
| AC Input / Shore Power | Up to 5,000W (Watts = Real Power) | 5,000VA Max (VA = Apparent Power) |
| Solar Charging Input | Up to 1,800W (12–50V, 50A) | 7,200W Max (3 MPPT: 4,000W + 1,600W + 1,600W) |
| Alternator Charging | Up to 1,200W (12/24V Vehicle Input) | Up to 4,800W (13–60V, 60A/30A/30A) |
| DC Output | 1,360W Max (12V) / 1,620W Max (24V) | 1,300W Max (12V) / 1,600W Max (24V) |
| Battery Capacity | 5.12 kWh (51.2V, 100Ah) | 5.12 kWh (51.2V, 100Ah) |
| Cycle Life | 6,000+ cycles up to 70% capacity | 3,500 cycles up to 80% capacity |
| Battery IP Rating | IP65 (dust-tight, water-jet resistant) | IP54 (limited dust, splash resistant) |
| Operating Temp | –4°F to 131°F (self-heating) | –4°F to 122°F (self-heating) |
